CRT Projectors: Teatro CRT: SVP 400 HT

SVP 400 HT


  • None Available

Product Detail:

A superior technical specification and stylish design combine to create a unique mix of performance and elegance. The SIM2 SVP400 HT offers the ultimate in high quality large screen viewing; an experience of image quality only available from CRT technology.

The SVP400 HT is equipped with high resolution Delta TAC 4 lenses, which provide superb image quality.

Featuring the latest in electronic innovation, these two projectors are fully modular in design and equipped (optional) with the latest SIM2's Up Converter (UPC 2000). By using gold-plated edge connectors to the main board, the UPC 2000 provides superior PAL/SECAM/NTSC signals by doubling the lines or doubling the field (100Hz).
The projector uses a DTI digital circuit to increase colour resolution, and a COMB filter to reduce cross colour / cross luminance. It is also equipped with a noise reduction system, a specific circuitry to enhance the dynamic focus, hue control (for NTSC) and sharpness control.
Convergence and set up are controlled by remote and all of the projector parameters: set up configuration, image aspect ratios including 4/3, 16/9 anamorphic or widescreen and scan frequencies can be selected, copied, moved and saved in up to 25 different memory banks.

Offering up to 5 separate inputs (including 2 S-Video, RGB and Component Input for DVD players) all switchable by remote control handset. In addition, two 12 Volt supplies are provided - one active when the projector is switched on (to activate an electric screen for example), the second active when 16/9 or wide image format is selected (to activate a screen mat system).

Technical Specs:


CRT 3 x 07MS 7” high brightness, high resolution CRT’s, liquid cooled, air coupling, average life of more than 10000 hours
Lenses 3 DELTA TAC 4 hybrid lenses for improved focus quality, full colour corrected, high resolution; 135 mm focal length. F number f/1.0 focus adjustments at centre and borders
Brightest 900 lumens at white peak
Picture size 60“-250“ diagonal screen width; 122cm-508cm
Installation rear or front projection; either floor or ceiling mounted (ceiling bracket supplied)


Horizontal scan frequency 15-16 KHz and 32-38 KHz autolock
Vertical scan frequency 45-150 Hz autolock
Bandwidth 20 MHz
Dynamic focus horizontal and vertical
Resolution more than 1000 TV lines with RGB video input, 640x480 pixels with VGA input
Colour temperature 3200°K, 6500°K, 9300°K, plus one user choice selectable and adjustable by remote control
Colour system quad standard (PAL, SECAM, NTSC 4.43 and 3.58)
Convergence type digital convergence with 17 adjustments made by remote control
Cut-Off automatic to improve the colour temperature stability
Keystone adjustable trapezium correction with a maximum of 20°
Masking horizontal and vertical masking adjustable by remote control
Test pattern 8 internal test patterns


Composite video 1 via BNC or SCART
Composite video 2 via BNC
S-VHS Input 1 via mini DIN 4-pin
S-VHS Input 2 via SCART
RGB HV input via 5 x BNCs or SCART
Computer input via 15 pin D-sub
Video output via BNC
Serial interface via DB 9 connector
Output voltage 2 power jacks with 12 Volt DC, 10 mA max output power supply: one is active only when the projector is ON, the other one is active only when a 16:9 or wide image format is selected


Information On Screen Display by Remote Control
Input voltage 120-240 Vac 48-62 Hz with Power Factor Corrector; 220-240 Vac 48/62 Hz
Power consumption 220 Watt max (6 Watt on stand-by)
Dimensions (WxHxD) 620 x 290 x 700 mm (24,4“ x 11,4“ x 27,5“)
Packaging dimensions (WxHxD) 800 x 490 x 880 mm (31“x19“x34“)
Net weight 35 Kg (77 Ibs)
Safety in compliance with EN60950
Operative function conditions temperature between 0°C and 40°C, relative humidity from 0% to 90% not condensed